Lipedema associated with Skin Hypoperfusion and Ulceration: Soft Tissue Debulking Improving Skin Perfusion.

Lipedema is a progressive connective tissue disease with enlargement of adipose tissue, fibrosis, fluid collection, and dermal thickening. Herein, we present a case of lipedema associated with skin hypoperfusion and ulceration in which soft tissue debulking with liposuction improved patients' symptoms. A 39-year-old female presented with asymmetric progressive initially unilateral lower limb swelling with severe pain with subsequent skin ulceration. Conservative management failed to improve her condition. After excluding other causes and detailed radiologic investigation, lipedema was diagnosed with an associated impaired skin perfusion. Trial of local wound care and compression therapy failed to improve the condition. Subsequent soft tissue debulking with circumferential liposuction and ulcer debridement and immediate compression showed dramatic improvement of the symptoms and skin perfusion. The unique nature of this case sheds light on lipedema as a loose connective tissue disease. Inflammation and microangiopathies explain the associated pain with hypoperfusion and ulceration being quite atypical and in part might be related to the large buildups of matrix proteins and sodium contents leading to fragility in microvessels with frequent petechiae and hematoma and subsequent tissue ischemia. Conservative measures like compression therapy plays a significant role in disease course. Surgical debulking with liposuction was shown to be efficacious in reducing the soft tissue load with improvement in limb pain, edema, circumference, and skin perfusion that was seen in our patient. Lipedema is a frequently misdiagnosed condition with disabling features. Skin involvement in lipedema with potential hypoperfusion was shown and it requires further investigation.

Identifying Functional Lymph Nodes in Lower Extremity Lymphedema Patients: The Role of High-frequency Ultrasound.

BACKGROUND: Lymph nodes may play a potential role in lymphedema surgery. Radiologic evaluation of nodes may reveal the status of pathologic conditions but with limited accuracy. This study is the first to evaluate the efficacy of ultrasound in detecting functioning nodes in lymphedema patients and presents a criterion for determining the functionality of the lymph nodes. METHODS: This retrospective study reviews 30 lower extremity lymphedema cases which were candidates for lymph node to vein anastomosis. Lymphoscintigraphy and magnetic resonant lymphangiography (MRL) imaging were compared with ultrasound features which were correlated to intraoperative indocyanine green (ICG) nodal uptake as an indication of functionality. RESULTS: Majority were International Society of Lymphology stage 2 late (50.0%) and stage 3 (26.7%). ICG positive uptake (functioning nodes) was noted in 22 (73.3%), while 8 patients (26.6%) had negative uptake (nonfunctioning). Ultrasound had significantly the highest specificity (100%) for identifying functional nodes followed by lymphoscintigraphy (55%) and MRL (36%; p = 0.002, p < 0.001, respectively). This was associated with 100% positive predictive value compared against lymphoscintigraphy (44%) and MRL (36%; p < 0.001 for both). The identified ultrasound imaging criteria for functioning lymph node were oval lymph node shape (Solbiati Index), morphology, vascularity pattern, and vascularity quantification. CONCLUSION: The use of ultrasound in nodal evaluation was proven effective in different pathologic conditions and demonstrated the best prediction for functionality of the lymph node based on the new evaluation criteria.

"Color Contrast" Technique using 10 % Sodium Fluorescein and Blue Marker to Maximize Visualization During Lymphaticovenous Anastomosis.

Lymphatics vessel wall and lumen visualization during anastomosis process is quite challenging for which different techniques were described with variable efficacy. Double opposing color contrast is created using 10% Sodium Fluorescein (FS) which stains lymphatic fluid with yellow causing a clear contrast to blue marker painted lymphatic wall improving the intra-lumen visualization during anastomosis process. This retrospective study evaluated the success rate of performing anastomosis between the side of the lymphatic vessel to the end of the vein (S-to-E LVA) for 281 patients. The LVA assessment showed mean lymphatic diameter of 0.44±0.09mm and mean vein diameter of 0.57±0.14mm with S-to-E success rate of 100% confirmed by post-anastomosis Indocyanine green lymphography. No adverse events were encountered, and FS was not used in two patients due to positive skin allergy test. This method has the advantages of not needing additional device, allows clear visualization and not staining the surrounding structures. This approach using opponent color contrast between fluorescent yellow and blue marker improved vessel edge identification which translated into higher visualization and patency with 100% success rate in S-to-E LVA performance.

Utility of Multimodal Treatment Protocols in the Management of Scalp Cutaneous Angiosarcoma.

Cutaneous angiosarcomas are rare, aggressive tumors with high recurrence and poor prognosis. We share our experiences with the challenging surgical management of these lesions, focusing on both ablative and reconstructive outcomes. Methods: Retrospective cross-sectional chart review was conducted of patients diagnosed with scalp cutaneous angiosarcoma between 2005 and 2021. Resectability, defect reconstruction, and survival outcomes were analyzed. Results: Thirty patients were included, 27 (90%) men and three (10%) women, with a mean age at diagnosis of 71.77 ± 7.3 years, and mean follow-up of 429.43 ± 305.6 days. Only 12 patients completed their regular follow-up, while the remaining patients died. There was a median survival of 443.50 days (range, 42-1283) and median time to recurrence of 21 days (range, 30-1690). Multimodal therapy compared with surgery alone had a significantly better overall median survival (468 days versus 71 days; P = 0.021). Defect coverage was obtained in 24 cases (75%) through an anterolateral thigh flap, two patients (6%) with a local transposition flap, and one patient (3%) with a transverse rectus abdominis myocutaneous flap. The remaining three patients received a skin graft. All of the flaps survived, with one requiring a vein graft for venous congestion. Conclusions: Timely multimodal therapy with a histologically safe margin, combined with adjuvant therapy, improves survival and delays recurrence and metastasis, in cutaneous angiosarcoma patients. An anterolateral thigh flap facilitates the coverage of wide defects. Further investigations of advanced treatment modalities such as immunotherapy and/or gene therapy are required to deal with this highly aggressive tumor.

Plastic Surgery in the Gulf Cooperation Council Countries: Role of Telemedicine.

Internationally, telemedicine is finding its way into common day plastic surgery practice as a result of the COVID-19 pandemic. Nonetheless, no data about its practice in the Gulf region are available to date. Methodology: This is a cross-sectional survey-based study that was sent online to the plastic surgeons practicing in the Gulf region. The study aimed to look into the integration of telemedicine into the practice and the surgeons' attitude and future vision about it. Participation was voluntary, and confidentiality was preserved. Results: A total of 229 plastic surgeons enrolled in this study in mid-2020. There were 192 male participants (83.8%) and 37 female participants (16.2%). Of these, 99 (43.2%) practiced in Saudi Arabia, 85 (37.1%) in the United Arab Emirates, 24 (10.5%) in Oman, 18 (7.9%) in Kuwait, and three (1.3%) in Bahrain. In total, 85 (37.1%) used telemedicine during lockdown, and 144 (62.9%) thought that its usage will remain beneficial in the future. There was no significant difference in practicing telemedicine in different plastic surgery subspecialties, varying level of experience, and country of practice. Among those who used virtual consultations, 62 (72.9%) did not charge for consultation fees. Conclusion: The tendency toward telemedicine integration in plastic surgery practice is growing worldwide, especially after COVID-19. Its limitations are outweighed by its advantages and, with time, many of these will be bypassed. New innovations driven by advancement in technology will further embed telemedicine into the practice.

Evolution and current status of microsurgical tongue reconstruction, part II.

Tongue reconstruction remains a major aspect of head and neck reconstructive procedures. Surgeons planning tongue reconstruction should consider several factors to optimize the overall outcomes. Specifically, various technical aspects related to tongue reconstruction have been found to affect the outcomes. Multidisciplinary teams dedicated to oncologic, reconstructive, and rehabilitative approaches play an essential role in the reconstructive process. Moreover, operative planning addressing certain patient-related and defect-related factors is crucial for optimizing functional speech and swallowing, as well as quality of life outcomes. Furthermore, tongue reconstruction is a delicate process, in which overall functional outcomes result from proper flap selection and shaping, recipient vessel preparation and anastomosis, surgical approaches to flap insetting, and postoperative management. The second part of this review summarizes these factors in relation to tongue reconstruction.

Intracranial Volume in Relation to Parent Satisfaction and Expert Opinion: A Novel Look at Surgical Outcomes.

Factors like parent satisfaction and expert opinion have been proposed as outcome measures related to craniosynostosis (CS) surgery. However, there is no real tangible score for CS surgery outcomes. In our study, we aimed to explore different factors considered as a tangible outcome measure of CS surgery. Methods: A retrospective cohort study of 23 patients with CS who were operated on in a tertiary care university hospital. Parents were interviewed to assess their satisfaction of aesthetic outcome. This was correlated to two expert opinions and to the amount of skull expansion. Results: The mean follow-up duration was 2.24 ± 1.12 years. Twelve of the 23 fathers were satisfied, whereas 11 of the 23 mothers were satisfied. The overall combined satisfaction rate of both parents was on the higher side with no difference in between. There was a significant association between expansion rate of 7.65 ± 4.99% and the overall parent's satisfaction (P = 0.002). Additionally, there was a good correlation between both experts with statistically significant association (P = 0.004). No correlation was found between the parents' satisfaction and the experts' opinions. Conclusions: The study is valuable, as it investigates the relationship between the expansion rate, parents' satisfaction, and expert opinion as predicted values of craniosynostosis surgery. The overall satisfaction correlated significantly well with the expansion rate. However, such numerical assessment is not a real guide for assessing clinical outcomes' as no association was found between expansion rate, satisfaction rate, and expert opinion.

Current status and evolution of microsurgical tongue reconstructions, part I.

Reconstructive surgery in the management of head and neck cancer has evolved to include structure-specific approaches in which organ-specific treatment algorithms help optimize outcomes. Tongue cancer management and reconstruction are surgical challenges for which well-executed reconstructive plans should be completed promptly to avoid delaying any subsequently planned oncologic treatment. Crucial considerations in tongue cancer resection are the significant functional morbidity associated with surgical defects, particularly in terms of speech and swallowing, and the consequent negative impact on patients' quality of life. With the evolution of microsurgical techniques and the development of the perforator flap concept, flap options can be tailored to the characteristics of various tongue defects. This has allowed the implementation of pliable flaps that can help restore tongue mobility and yield subsequent functional outcomes. Using an evolutional framework, we present this series of reviews related to tongue reconstruction. The first part of the review summarizes flap options and flap-related factors, such as volume and tissue characteristics. Related functional aspects are also presented, including tongue mobility, speech, and swallowing, as well as ways to evaluate and optimize these outcomes.

Digital workflow for fabrication of bespoke facemask in burn rehabilitation with smartphone 3D scanner and desktop 3D printing: clinical case study.

We present a digital workflow for the production of custom facial orthosis used for burn scar management using smartphone three-dimensional (3D) scanner and desktop 3D printing. 3D facial scan of a 48-year-old lady with facial burn scars was obtained. 3D modeling with open-source programs were used to create facemask then 3D printed using rigid polylactic acid (PLA) filament and semi-rigid thermoplastic polyurethane (TPU). Conventional facemask was used as a control. Each mask was worn for 7 days. Primary outcomes were level of comfort, and adherence to treatment. The conventional facemask was the most convenient followed by the TPU-facemask (mean comfort score of 9/10 and 8.7/10, respectively). Patient's compliance was high for both TPU and conventional masks, each was worn for at least 21 hours/day for 7 days. On the contrary, PLA-facemask was not well tolerated. The proposed digital workflow is simple, patient-friendly and can be adopted for resource-intensive healthcare.

Posterior Tibial Artery Perforator V-Y Advancement Flap for Small-Medium Size Lower Limb Defects.

The posterior tibial artery perforator flap has been described as a good option for small to moderate lower extremity defects with consistent anatomy and caliber. Different geometrical designs are found in the literature for posterior tibial artery perforator flaps and are mostly executed as propeller, peninsular, and island flaps. Upon literature review, V-Y advancement flaps were not commonly used, despite the clear design, persistent anatomy, and straight execution. Our aim was to report our case series to present the validity of such design and the success of reconstruction. METHOD: Over 1 year, three cases were reconstructed successfully with posterior tibial artery perforator flaps with V-Y advancement design. Clinical evaluation was done for all patients as well as follow-up in the outpatient clinic until complete healing of the wounds was achieved. Multiple modifications were done intraoperatively to enhance flap reach and minimize the complications, including designing V-Y advancement flaps larger than the defect, careful perforator dissection, and finally, strict postoperative course. RESULTS: All three cases healed completely with no complications. The average follow-up time in the clinic was 3 months. CONCLUSIONS: Posterior tibial artery perforator flap with V-Y advancement design is a viable option for reconstructing medium sized lower limb defects, but requires careful design and execution. The suggested steps will increase the survival of the flap and reconstruct the defect successfully.

The Utility of Smartphone 3D Scanning, Open-Sourced Computer-aided Design, and Desktop 3D Printing in the Surgical Planning of Microtia Reconstruction: a Step by Step Guide and Concept Assessment.

INTRODUCTION: Microtia, a congenital anomaly of the auricle with a wide spectrum of presentation with challenging reconstruction. Management depends on its severity with variable reconstructive options. Preoperative planning is crucial to achieve better results and decrease operative time. In this article, we aim to show the utility of an affordable technology with the use of a smartphone, an open-source computer-aided design (CAD) software, and a desktop 3D printer in planning future ear location for unilateral microtia reconstruction in step-by-step fashion. METHODOLOGY: Facial 3D scanning was done using a smartphone that has a three-dimensional capture system. The scan was then used in an open-sourced CAD software. A mirror image mask was created by reflecting normal side anatomic features to the abnormal side. The mask constitutes the desired area for reconstruction given the ear anthropometrics. Finally, the model was 3D printed and fitted to the patient in which incision marking and framework location was planned. DISCUSSION: Ear reconstruction requires careful assessment and specific technicality in its anthropometric measures. One important aspect in surgical planning resides in future ear location that varies between person to person. This variability makes the reconstructive option more customized based on the patient's needs. The utility of CAD software in the measurement and planning can help predict and optimize postoperative results as possible; however, it has major technical demands and added surgical fees. CONCLUSION: Herein, we demonstrate the efficacy of an easy-to-use system beneficial for preoperative planning that is affordable, time-saving, and cost effective.

Smartphone-assisted Augmented Reality in Craniofacial Surgery.

Augmented reality (AR), a blending of both the physical and digital worlds, can be a valid tool for surgeons wishing to plan interventions and attain symmetry. The use of technology has enabled physicians to achieve desirable results. In this article, we describe a method that uses smartphone's simple AR utilities for convenient, cost effective, and time saving perioperative planning. METHODS: Images of preoperative computed tomography, along with 3D reconstructed scans were uploaded to a smartphone and used in an affordable application (Camera Lucida) to superimpose the loaded pictures over the smartphone camera. In one case, a 3D computed tomography scan of the skull was mirrored to help guide fronto-orbital advancement, and in another case the loaded 3D reconstructed computed tomography scan was used to prioritize areas of scalp coverage in a complicated case of craniosynostosis with major scalp wound dehiscence. DISCUSSION: Adaptation of AR to assist in the field of craniofacial surgery has been introduced before in several studies that reported the use of computer-based guidance for cranial reshaping. The majority of these reports used sophisticated modalities, combining advanced image registration and tracking with specialized equipment. The utility of smartphone AR for cranial vault reconstruction provided good accuracy when visualizing fronto-orbital advancement and remodeling, together with in depth prioritization of areas in need of soft tissue reconstruction. CONCLUSION: Smartphone AR adaptation proved to be a very convenient tool assisting in the planning of different craniofacial conditions that are time saving and do not incur any additional fees beyond those of the surgery.

Multiscale sterilizable 3D printed auricular templates to guide cartilaginous framework sizing and sculpture during autologous microtia reconstruction.

Microtia reconstruction using autologous costal cartilage can be one of the most challenging tasks in reconstructive surgery. An intraoperative guide using 2-dimentional drawing of the contralateral ear on an x-ray film remains the current standard of care. In this paper, we present the use of computer-aided design and desktop 3D printing to fabricate low cost, sterilizable auricular carving templates to serve as a peri-operative reference for microtia reconstruction. The design was made as a single component which incorporated the usual anatomic reference points of the ear based on Nagata technique as a Stereo-lithography file format (. STL) for 3D printing. The templates were created in sizes ranging from 55 mm to 70 mm with a 2 mm increment with an average production cost of 0.26 US dollars per material per template and about 4.5 US dollars for the whole set. Individual templates were then 3D-printed using a thermoplastic polyurethane (TPU 95A) semiflexible filament on a desktop fused deposition modeling, Ultimaker 2 + 3D printer. The produced template tolerated the sterilization process with no structural changes as compared to its pre-sterilization condition. In conclusion, we present cost-effective, sterilizable, multiscale auricular templates to guide the pre- and intra-operative carving of the cartilaginous framework during microtia reconstruction with more accuracy in a time efficient manner, thereby overcoming the drawbacks of using the traditional x-ray film. The templates are readily accessible and sharable for free through open-source software and can be directly 3D-printed using an affordable desktop 3D printer.

The Utility of Double Opposing Transposition Flaps in the Management of Inguinal Ectopic Scrotum: Surgical Experience and Literature Review.

An ectopic scrotum (ES) represents a rare developmental anomaly of the male genitalia. The condition usually represents a part of a wide spectrum pathology associated with other anomalies. The different locations in which an ectopic scrotum is found include inguinal, suprainguinal, infrainguinal, and/or perineum. There are several surgical techniques described in the literature related to the management of ES, but none of them showed superior results. We present a rare case of ectopic hemiscrotum managed as part of a multidisciplinary team approach, showing the utility of double opposing transposition z-plasty flaps in managing such a case.

Plastic Surgery and COVID-19 in the GCC: Fears, Lessons Learned, and the Plan for the Future.

BACKGROUND: With the labeling of Coronavirus Disease 2019 (COVID-19) as a pandemic by the World Health Organization, national directives were issued instructing to close all cosmetic clinics, suspend all cosmetic procedures, and only operate on an emergency basis. As a result, many plastic surgeons faced challenges sustaining their practice. We aimed to investigate the effect of these national directive instructions on the surgeons and to review their strategies for adapting their practices during this new pandemic. METHODS: A cross-sectional descriptive study was conducted using an online questionnaire. It was constructed to assess the attitudes and practices of plastic surgeons in the Gulf Cooperation Council countries during the COVID-19 lockdown. It also explored their strategies on reopening their practice, as well as their plans on modifications of practice during and after the lockdown. RESULTS: In total, 197 surgeons responded to the survey. The majority were from Saudi Arabia (42.1%), followed by the United Arab Emirates (37.6%), with relatively smaller participation from the remaining countries. Over two-thirds (69.5%) indicated that the pandemic had affected their practice. Surgeons in private practices were significantly affected (P < 0.001) compared with those in the public sector. Only 39% of respondents mentioned COVID-19 testing as part of their post-pandemic surgical protocol. CONCLUSIONS: Surgeons' responses to the pandemic varied. Fear and future uncertainty significantly led to a surge in the utilization of different technical means to maintain the patient pool. Surgeons' education about post-pandemic precautions is essential to maintain high standards of care in the region.

Pseudotumor of hemophilia of the thumb.

[No Abstract Available].

A Low-Cost 3D-Printed Tool with Multiaxial/Angular Vessel Orientation for Microvascular Anastomosis Training.

BACKGROUND: Microsurgical anastomosis is a technically demanding skill. The most difficult part of the learning process was in achieving the necessary orientation and dexterity. In this project, we adopted computer-aided design and desktop 3D-printing in the development of an affordable training model with different levels of vessel orientation and angulation. METHODS: The training model was designed using CAD software (Rhino3D). The models were then 3D-printed with a thermoplastic polyurethane (TPU 95A) semiflexible filament on a desktop fused deposition modeling, Ultimaker 2 + 3D printer. RESULTS: The printed training tool was assembled by fitting the ball-and-socket mechanism between two parts having an overall round table top with integrated vascular clamps. Trial with synthetic and nonliving animal blood vessels shows the utility of the clamps in holding the vessels within the working space. By rotating the top part, a multiaxial vessel orientation from 0 to 360 degrees was achieved. The top part was also capable of multiangular orientation of the vessels (±30 degrees) regardless of its axial orientation during vessel anastomosis. For the 3D-printing process, the average printing time was about 3.5 hours with a cost of 1.3$ per material. CONCLUSIONS: The utility of desktop 3D printing represents an affordable modality in microsurgical training. The designed model is capable of providing a trainee with multiaxial and multiangular vessel orientation during the anastomosis process. To our knowledge, the adoption of this technology in the field of microsurgery training has never been investigated before.

Venous Coupler in Pediatric Free Tissue Transfer: Case Series and Literature Review.

BACKGROUND: Venous couplers have gained widespread acceptance as an effective, safe, and time-efficient alternative for hand-sewn anastomosis in microsurgical reconstruction. The literature on venous couplers use in pediatric free tissue transfer is scant. The purpose of this study is to present our experience with coupler-assisted venous anastomosis in young pediatric free flap reconstruction. METHODS: This is a retrospective single-center review of all children younger than 10 years old who underwent free flap reconstruction over 36-month period. The primary objective was to assess flap survival rate at 30-day postoperative period. The rate of venous thrombosis, flap take back, flap salvage, and the mean coupling time were also assessed. RESULTS: Four girls and 1 boy with a mean age of 7.3 ± 2.7 years (range 4-10 years) underwent 6 free flap transfers for head and neck, upper limb, and lower limb reconstructions. Microvascular anastomotic coupler system was used for 8 out of 9 performed venous anastomoses with a size ranging from 1.5 to 2.5 mm. Primary flap survival rate was 100%. None of the flaps in our series developed venous thrombosis or required flap take back for microvascular compromise (mean follow-up of 14.4 months). The mean coupling time was 7.1 minutes. CONCLUSIONS: In the current study, venous couplers were safe and reliable in free tissue transfer in children younger than 10 years old. Future studies with larger sample size are needed to further examine the safety and efficacy of venous couplers in pediatric microsurgical anastomosis.

Plagiarism Perceptions and Attitudes Among Medical Students in Saudi Arabia.

OBJECTIVES: This study aimed to determine attitudes towards and perceptions of plagiarism among medical students in Saudi Arabia. METHODS: This cross-sectional, multicentre study was conducted between April and May 2018 and involved medical students enrolled in three medical schools in Riyadh, Saudi Arabia. The previously validated Attitude Towards Plagiarism questionnaire was used to evaluate approval (i.e. a positive attitude) and disapproval of plagiarism (i.e. a negative attitude) among medical students. Furthermore, this study evaluated whether attending medical writing courses or courses in medical ethics influenced medical students' attitudes towards plagiarism. RESULTS: A total of 551 students participated in the study (response rate = 73.5%). A significant association was found between mean negative and positive attitude scores and grade point average (GPA; P = 0.004 and 0.007, respectively). Students attending medical ethics courses had higher mean negative attitude scores compared to students who did not attend such courses (odds ratio = 2.369, 95% confidence interval: 1.540-3.645; P <0.001). Attending medical ethics courses was associated with a significantly more negative attitude towards plagiarism (P <0.001, each). CONCLUSION: The majority of medical students in Saudi Arabia included in this study indicated a highly negative attitude towards plagiarism. A higher GPA, the authoring of a published manuscript and attending courses in medical ethics were associated with negative attitudes towards plagiarism among medical students.

Low-Cost Desktop-Based Three-Dimensional-Printed Patient-Specific Craniofacial Models in Surgical Counseling, Consent Taking, and Education of Parent of Craniosynostosis Patients: A Comparison With Conventional Visual Explanation Modalities.

BACKGROUND: Craniosynostosis is a complex craniofacial deformity. Surgical decision, if needed, is always hard on the parent and requires the use of multimodalities of explanation. To the authors' knowledge, there have been no studies tackling family counseling about the deformity and surgical decision-making process with the use of low-cost patient-specific three-dimensional (3D)-printed models. METHODS: A cross-sectional study investigating the utility of patient-specific 3D-printed models using a desktop-based 3D printer. Questionnaire was constructed and validated screening the demographics, knowledge, expectation, and surgical decision-making process supplied using Likert. Data were collected consecutively from each parent first after explanation with conventional 3D computed tomography (CT) images, and then repeated after the 3D-printed model has been presented. RESULTS: Fourteen parents were screened. Majority of parents considered the pathology to have a potential effect of child's functional and aesthetic outcomes. After using the 3D-printed models, the participants had a clear vision and needed not to read any more about the condition (P = 0.05, P = 0.019, respectively). Agreement for surgical management was in favor of the 3D-printed models compared with CT images (P = 0.028). Explanation with CT images yielded higher mean score in knowledge about potential complications compared with 3D models (P value = 0.007). For the 3D models, average printing time was 26 hours, and a mean cost of 5.2$. CONCLUSION: The utility of desktop 3D printing is an affordable modality to provide adequate information about craniosynostosis and can assist surgical decision-making. Knowledge and adaptation of such cheap technology represents a great skill aiding clinical practice.